Profile: KWA M4 Commando (Custom)

Primary Weapon Profile KWA M4
Specs
FPS 330 FPS w/ .25g (350 FPS w/ .20g)
KWA KM4 Commando
UTG RAS
11.4 Lipo
Madbull M110 Spring
HunterSeeker5's "R-Hop" (M-nub)
Madbull "Black Python V.II" Inner Barrel
JBU Suppressor
M180 DevilJet Motor



On of my favorite things I was able to do with this gun was fit an 11.4 LiPo underneath the rail system. The gun is wired to the front, which usually means you are going to need a PEQ box. I also attach a PEQ box 7.4 if I am looking for a slower rate of fire.

The ROF with the 11.4 and the DevilJet motor are actually too fast. You will run through a mid cap in no time. But if going semi, the response time is outstanding with the 11.4 under the rail.




I play around with scopes on this gun from time to time, but in most cases just having the basics is fine. I put a magpul flip up front site on the end of my rail.

I dont even know where I got this suppressor but it looks bad ass on the M4. It also has foam inside and suppresses a small amount of gun fire.

These 80 round magpul midcaps were about 7 bucks a piece at godfather airsoft. I got 10 of them. They are probably the best mags I have ever used. I think tha the difference is the fact that 80 round mags only coil the internal spring one time as opposed to two times with 120 round mags. They dont jam and feed fast enough to keep up with my high ROF. Lightweight and durable.

Sitting at 330FPS with .25s the effective range is still farther than guns shooting over 400. The trajectory is flat without many dips up or down until you can no longer see the BB. Just a consistent and reliable gun that has only snapped a piston in the last year of consistent play. If you are looking for an M4 platform, I highly recommend KWAs over most others.